Technical Application Group

Mitel 3300 configuration

*There will need to be an available “IP User” license on the Mitel 3300 for every SIP extension (q-sys softphone).

SIP Station setup.

User and Services Configuration

1. Create a new unused extension, with the device type “Generic SIP Phone”
2. Select Service Profile tab
   1. Number is the extension and will be used by Q-sys

1. Select Access and Authentication Tab
2. Set password for authentication under “SIP Password” (will be used as Q-sys Authentication password)

Q-sys Setup:

Designer

1. Add a softphone(s) to designer file.
2. Save to core and run

Core Manger -> Telephony

1. Configure Softphones General settings
   1. Select the correct Interface
   2. SIP Port 5060 unless advised otherwise
   3. Audio Codecs G.711ulaw and G.722

1. Configure individual softphones
   1. Register with Proxy: YES

Save settings.